Residential Locksmith in Penn Wynne, for homes and apartments, done where the lock is from a van that carries the parts. Call and you get an honest answer on when we can be there.
Where our customers find us
Residential Locksmith
Houses in Penn Wynne bring the usual mix of lock problems: keyed deadbolts that stick, wood-frame doors with worn jambs and misaligned latches, mailbox or garage locks clogged with grit, and old mortise locks whose tumblers have seized. We come to assess the hardware on the spot and explain whether a repair or a replacement makes more sense. We describe what we see plainly (a broken tailpiece, a stripped spindle, a hardened spring) and show the part or replacement before we begin the work.
When we work on a residential deadbolt or knobset we take the lock apart to inspect the cylinder, plug and cam, then check the bolt and strike. For rim locks and surface bolts we look at the screws into the door and the condition of the strike plate. If a lock has had repeated forced entries we examine for sheared screws, split jamb, and frame movement and recommend a reinforced strike or longer screws to secure the strike into the framing.
If you’re waiting at the house, keep the area around the door clear and move any pets away from the work zone. Hold any keys you still have and, if you lost keys, be ready to identify which door we’re working on and tell us whether there are any existing keyed-alike sets in the home. We can rekey a cylinder to a new key on site, or install a new cylinder or whole lock if the existing hardware is worn beyond serviceable repair; we will show you the component we plan to use.
We drive out from Havertown and bring the tools and common replacement parts to complete most residential jobs in one visit. If a job needs a particular mortise lock body, heavy-coated deadbolt, or an oversized strike plate we’ll explain why and what we’re ordering. For historic hardware we match finishes and pinning where possible. If you’re in nearby Overbrook, Merion, Narberth or Ardmore and have questions about a door not latching smoothly or a mailbox cylinder that spins, call and tell us what the lock does when you operate it so we can prepare the right parts.
Where this sits
The work
★★★★★
Excellent locksmith services! Very speedy and clean work. Highly recommended!
Drew Coulter
Google review
Our own work
Hardware we work on
We can rekey most standard pin-tumbler cylinders by removing the lock, taking the cylinder to our van, and changing the pin stacks so a new key operates it. We recommend rekeying all exterior entry points to a single key or using separate keys per door, whatever keying system you prefer. We can also tell you if a cylinder is worn and needs replacement.
We’ll check the cylinder, latch, strike plate, and door alignment. Often sticking comes from swollen wood, a misaligned strike, or a dirty cylinder; we can realign the strike, adjust the jamb, or clean and lubricate the cylinder with graphite. If the hardware is worn or a higher-security lock is desired, we can replace the deadbolt with a compatible unit and install it cleanly.
You have two main options: rekey the existing cylinders so old keys no longer work, or replace the cylinders or entire locks for a different keyway or higher-security cylinder. We can rekey multiple locks to the same new key, install restricted-key cylinders, or fit compatible electronic locks depending on the door and hardware you already have.
Other work
