What goes wrong
We work on commercial doors that get the most use: glass storefronts with cylinder locks, metal service doors with lever trims, and heavy core doors fitted with long-throw deadbolts. Common failures in Towamencin Township are worn cylinders that bind, latches that no longer latch because the strike plate has opened the wood or metal around it, and exit devices that stick after years of dirt and corrosion. We diagnose the mechanical problem first, then determine whether the cylinder, the latch assembly, the strike, or the exit device needs repair or replacement.
02
What the job involves
We install and service exit devices, panic bars, door closers, strikes, and keyed or keypad access control units for offices and small warehouses. When we replace parts we match physical dimensions: backset, faceplate size, through-bolt spacing, and door thickness so the hardware seals and rides correctly. For access control work we run wiring only where the existing routing allows or show how a new conduit would be installed. We drive out from Havertown and work on-site so the job is completed at the door.
03
Good to know
While we work you can keep staff and customers clear of the work area, move merchandise away from door swings, and hold any keys, access cards, or existing master key records where we can see them. If you have replacement keys, keyway codes, or a copy of the current master key plan, have that folder ready before we arrive. We can also cut new keys on-site from an existing cylinder or code, and we will check that deadlatches and reinforced strikes align before handing the door back to you.
04
Worth knowing
For security upgrades in Towamencin Township and nearby Kulpsville or Lansdale we replace weathered strikes with reinforced plates, swap out mortise locks for cylindrical units with stronger latches, add surface-mounted closers, or fit electronic keypads and proximity readers to entrances. We test every door for consistent operation after work: the latch should ride smoothly into the strike, the closer should control the swing without slamming, and an exit device should retract cleanly when pushed. We always explain what we did and show you how the hardware operates before we leave.
