Maple Glen is one of the towns we cover for commercial locksmith work for offices, stores and buildings. We bring the tools and parts to you; ask on the phone when we can reach you and we will say it straight.
Where our customers find us
Commercial Locksmith
We work on storefronts, warehouses, and office doors across Montgomery County from our mobile van based in Havertown. Common commercial problems are a cylinder that sticks after heavy use, a latch that no longer aligns with a worn strike, or an exit device whose dogging mechanism has failed. We diagnose the part that is binding or broken, whether that’s the cylinder, the spindle, the mortise case, or the strike, and then recommend repair or replacement of the actual mechanical component rather than replacing hardware unnecessarily.
When a panic bar or exit device fails to retract cleanly we check the pushpad linkage, the tailpiece, and the dogging parts for wear or misalignment. For access control and keypads we test the power feed and door contacts and trace the fault to the door hardware or the controller. If a door closer slams the door or no longer closes it fully we adjust the spring and valve settings and, if needed, swap in a closer with the proper arm and body for the door weight and swing.
If you call from a Maple Glen business, we ask that you keep employees clear of the work door and have an on-site contact who can make decisions about keeping the door closed, using a secondary entrance, or temporarily securing the opening. For interior master key work or rekeying we request a person who has authority over keys; for access control work have the primary administrator available if possible. While we work we secure any loose hardware, cover thresholds or flooring if we need to remove a strike plate, and keep the area clean.
For replacement hardware we can bring cylinders, mortise locks, exit devices, reinforced strikes, electric strikes, keypads, and basic access-control components so we can swap parts on the spot when appropriate. We drive out from Havertown and carry the hand tools and drilling equipment commonly used on commercial doors, including punches, drill bits and spindles sized for heavy-duty hardware. If you’re in Maple Glen or nearby Horsham Township, have the building key plan or any current master key information handy, or at least the door number and a contact who can confirm core and keyway types.
Where this sits
Nearby
We cover the towns around Maple Glen as well.
The work
★★★★★
Helped me get my car unlocked in great time! Was very flexible and had great service! So thankful for this group!
Isabelle Carreon
Google review
Maple Glen
Our own work
Hardware we work on
We design and install master key systems that map keys to door groups and access levels. We rekey cylinders, cut and stamp the hierarchical keying, and document the key plan for you. If you already have cylinders, we assess compatibility and replace cores or cylinders as needed to implement the master key scheme.
We inspect the exit device, latches and the strike, then adjust or replace worn parts. That can include swapping the panic bar, replacing the latch mechanism, realigning or fitting a new strike plate, and testing operation so the device retracts cleanly. We also address related door swing and frame issues that affect the fit.
We evaluate the door, existing deadbolt and frame, then propose an access-control solution: standalone keypad, electro-mechanical strike, or electric strike that works with your deadbolt. We can install a surface or concealed strike and add a door closer to meet your door operation needs, making sure the components work together reliably.
Other work
We come to you
