Aldan is one of the towns we cover for commercial locksmith work for offices, stores and buildings. We bring the tools and parts to you; ask on the phone when we can reach you and we will say it straight.
Where our customers find us
Commercial Locksmith
We handle the kinds of commercial lock trouble tenants and managers call about in Aldan: cylinders that stick, mortise locks with broken tailpieces, exit devices that no longer latch, and panic bars that jam under load. We drive out from Havertown with the tools to diagnose whether a part can be repaired on the door or needs replacement. On arrival we inspect the lock and the strike, check door alignment and the condition of the frame, and describe the physical work needed: changing a cylinder, replacing a reinforced strike, or refitting a closer.
A failed keyway, split key or badly worn pins are common reasons a lock won’t operate reliably. We can rekey cylinders, replace worn cores, or cut new keys from a working cylinder on site. For electronic systems we can replace batteries, reseat wiring for keypads, or swap out the keypad or control board. When a master key system is involved we track the existing keying and show how new cylinders or core swaps will affect access across suites and common areas.
While we come out, secure the area you can and reroute customer or employee traffic away from a problem door. If a door must remain closed, put up a temporary sign and use an alternate entrance, and if there’s a risk to property move valuables to a safer room. Have the building or unit name, suite numbers, and the point of contact ready, and if you can, send photos of the hardware and the keyway ahead of time so we can bring correct parts and cylinders from the truck.
For planned changes we work with facility staff in Aldan and nearby Clifton Heights or Lansdowne to outline options: change the mechanical cylinders, install an electric strike, swap to a keypad, or extend a master key system with match-cut cores. We install, adjust and test exit devices, replace door closers for proper sweep and latch, and fit heavy-duty deadbolts with long throws and reinforced strikes where extra holding power is needed. We carry parts and stock common cylinders so we can complete most mechanical jobs once we’ve agreed the scope of work.
Where this sits
Nearby
We cover the towns around Aldan as well.
The work
★★★★★
Excellent locksmith services! Very speedy and clean work. Highly recommended!
Drew Coulter
Google review
Our own work
Hardware we work on
We design and install master key systems on-site, cutting and coding keys, rekeying cylinders, and labeling cores so supervisors and staff have the correct access. We lay out key hierarchy, replace cylinders or cores as needed, and document keying for your records. We work across Delaware, Chester, Montgomery counties and Philadelphia.
We inspect exit devices, panic bars, strikes, and latch assemblies where they sit, replacing worn latches, adjusting rod alignment, and swapping strike plates or trim as required. If a component is beyond repair, we can replace the device or strike and test operation so the door latches and releases cleanly.
We install standalone and networked keypads, readers, and electric strikes, tie them into existing hardware, and set user codes or credential lists on-site. We also fit or adjust door closers and power transfers so the hardware works reliably with the access control. Routine service visits for adjustments are available as needed.
Other work
