Locksmith in Audubon, PA

Removing the broken fragment from the keyway is our first step; we then cut a new key to match and repair or replace a damaged cylinder if needed. Until we arrive, don’t try to turn the key or shove anything into the keyway; keep both halves of the key and have the door closed so the lock isn’t stressed.

Servicing the mortise or cylinder is what we do first: we clean, tighten, and adjust moving parts or fit a replacement lock that fits the existing cutout so you don’t have new holes. Tell us the symptoms (sticking, grinding, loose knob) and have the door unlocked and accessible; don’t force the key or spray oil into the lock.

Installing the keypad or smart lock on the current door, we align the bolt with the strike and program the unit together with you; we also fit a mechanical key override if the model allows. Have the complete lock and all included parts plus fresh batteries ready, and keep the door closed so we can check bolt alignment.

Adjusting strike plate alignment or the bolt is how we fix that, a shifted door commonly causes the bolt to miss the strike; we’ll also service or replace a worn cylinder if that’s contributing to stiffness. Until we get there, be gentle with the key, don’t oil the lock, and leave the door closed so we can assess latch engagement.